apache2配置相关

apache2的端口配置不同于apache,没有httpd.conf 这个文件。

而是一般在 /etc/apache2/ports.conf 添加监听端口,在 /etc/apache2/sites-enabled/ 下面新加端口对应的路径。

ports.conf 增加Listen的端口

# If you just change the port or add more ports here, you will likely also
# have to change the VirtualHost statement in
# /etc/apache2/sites-enabled/000-default.conf

Listen 80
Listen 8009
Listen 8006

在 /etc/apache2/sites-enabled/ 下面新加8006.conf

<VirtualHost *:8006>
	# The ServerName directive sets the request scheme, hostname and port that
	# the server uses to identify itself. This is used when creating
	# redirection URLs. In the context of virtual hosts, the ServerName
	# specifies what hostname must appear in the request's Host: header to
	# match this virtual host. For the default virtual host (this file) this
	# value is not decisive as it is used as a last resort host regardless.
	# However, you must set it for any further virtual host explicitly.
	#ServerName www.example.com

	ServerAdmin [email protected]
	DocumentRoot /var/www/html/me

	# Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
	# error, crit, alert, emerg.
	# It is also possible to configure the loglevel for particular
	# modules, e.g.
	#LogLevel info ssl:warn

	ErrorLog ${APACHE_LOG_DIR}/error.log
	CustomLog ${APACHE_LOG_DIR}/access.log combined

	# For most configuration files from conf-available/, which are
	# enabled or disabled at a global level, it is possible to
	# include a line for only one particular virtual host. For example the
	# following line enables the CGI configuration for this host only
	# after it has been globally disabled with "a2disconf".
	#Include conf-available/serve-cgi-bin.conf
</VirtualHost>

# vim: syntax=apache ts=4 sw=4 sts=4 sr noet


其他一些apache2设置小细节:

打开网站目录显示:

<Directory />
    OptionsIndexes FollowSymLinks #这样就可以让网站显示目录结果了.
    # Options FollowSymLinks # 这样是网站关闭网站显示目录
    AllowOverride All
</Directory>

重启apache服务:

apahce启动命令:
推荐/usr/local/apache2/bin/apachectl start apaceh启动


apache停止命令
/usr/local/apache2/bin/apachectl stop   停止


apache重新启动命令:
/usr/local/apache2/bin/apachectl restart 重启

版权声明:本文为qyh666原创文章,遵循 CC 4.0 BY-SA 版权协议,转载请附上原文出处链接和本声明。
本文链接:https://blog.csdn.net/qyh666/article/details/78233172